6 Software TD ControlCenter
42
DHV0075 b2 EN
©
b2 electronic
gmbh
Step 3-A: Setting up a TD Communication Port (External Dongle)
After installation and configuration of the Bluetooth drivers and hardware
dongle, an icon called “My Bluetooth Places” gives you access to all Bluetooth
specific properties and configurations.
All configured devices are listed under the “My Bluetooth Places”.
Switch on the TD system
Before connecting, reset the TD System by switching the main power switch off
and then ON again.
Make sure the TD system is within 50 foot / 15 meters of the connecting
computer. Since the Bluetooth RF signals can be affected by other wireless
systems and obstructions such as WLAN or other RF devices, try moving the
TD system closer to your computer if you cannot get a “pairing” connection from
following the procedure below.
Setup the Communication Port to connect to the TD / TD-MC
Start to set up a communication port to the TD system by double-clicking on the
“My Bluetooth Places” icon.
