INPUT
Signal input from the head unit. A minimum level
input of 0.2V is essential for correct operation
.
POWER & PROTECTION INDICATOR
Power LED, Blue-lit shows correct operation.
Protect LED, Red-lit shows general malfunction,
faulty connection or thermal protection.
GAIN (6V ~ 0.2V)
Matching of the output voltage from the head unit’s
RCA line-outs to the input section.
SUBSONIC FILTER
(10Hz ~ 50Hz @ 24dB/Oct)
Adjusts the subsonic cut off point to eliminate
frequencies within the filter’s range.
REMOTE LEVEL CONTROL PORT
Connection of external level control.
(The
Better Bass Remote
can be connected for additional features).
OUTPUT MASTER / INPUT SLAVE
For daisy chain connection of 2
Zero.7
amplifiers.
Minimum impedance is 2
.
Output signal can be routed from 1 master amplifier
to 1 slave amplifier by setting the switch to INPUT SLAVE
on the slave amplifier and use the RCA IN / OUT
on the designated unit. This will invert the phase on the
slave amplifier and allow both amplifiers to work as 1 unit.
LOW PASS FILTER
(35Hz ~ 250Hz @ 24dB/Oct)
Adjusts the cut off point for the low pass filter
within the filter’s range.
PHASE CONTROL
Variable phase adjustment from 0-180 degrees.
4
Panel layout
BASS BOOST
Variable bass boost with 0-9dB at 45 Hz
SPEAKER OUTPUTS
Amplifier connection to the loudspeakers.
Minimum speaker cable is 12 gauge.
Minimum impedance for the
Zero.7
is 1 if
used as a single unit.
In a daisy chain configuration the minimum
impedance is 2
.
Zero.7
SWEET LIKE DANISH
