5
Zero1
GND (GROUND CONNECTION)
+ 12V (POWER CONNECTION)
Connects to the vehicle’s chassis.
Connects to the positive terminal of the battery.
Keep as short as possible (< 20” / 50 cm)
For specified performance 0 Ga cable is required.
Use minimum 0 Ga cable for optimal conditions.
Fuses shall be placed within 8” / 20 cm of the battery.
The HI-EF class D design allows for higher output
REM (REMOTE)
power, even at low voltage applications.
Connects to sw12V from the headunit.
This sets high requirements to the battery system.
Choose
batteries
with
high
CCA
ratio.
Head unit
CAUTION
Installation of the amplifier shall be done in the following steps:
1. Connect the +12V wire, keep in mind this wire has to be fused at the battery as well. 2. Ensure the ground is
appropriate, then connect it to the amplifier. 3. Connect the switched remote. 4. Reattach negative wire (ground)
to the battery. 5. Operation over 16V will cause the amplifier to go into protect & can void the warranty!
* Keep ground as short as possible and of
equal length, no longer than 20” (50 cm).
This drawing is for illustration purpose only!
GROUND*
GROUND*
300A (External fuse)
Panel layout