B.Well WA-88, Instruction Manual

Page: 9 / 36

7
Attention!
After the battery warning appears, the device is blocked until the batteries have been replaced.
Please use «AAA» Long-Life or Alkaline 1.5V Batteries. The use of 1.2V Accumulators is not reco-
mmended.
If the blood-pressure monitor is left unused for long periods, please remove the batteries from the
device.
Functional check: Hold on the O/I button down to test all the display elements. When functioning
correctly all segments must appear.
4.2. Reading the set date
Please press the «Time» key.
4.3. Setting the time and date
This blood-pressure monitor incorporates an integrated clock with date display. This has the advantage,
that at each measurement procedure, not only the blood-pressure values are stored, but also the exact
moment of the measurement.
After new batteries have been inserted, the clock begins to run from the following setting: 2003-1-01
12:00 o’clock.
You must then re-enter the date and current time. For this, please proceed as follows (Example: Entering
2006-06-15 Time 09:30 o’clock):
1) Press the TIME button for at least 3 seconds.
The display now indicates the set year, during which
the last two characters blink.
2) The correct year can be entered by pressing
the MEMORY
button. (Example: 3 x press)
3) Press the TIME button again. The display
now switches to the current date, during which
the first character (month) blinks.
istruction_All.indd 7 13.04.2006 16:06:51