background image

2

Do not attempt to install this product until all instructions and warnings have been read and 

properly understood. Please keep these instructions for future reference. 

B-Tech International Limited, its distributors and dealers are not liable or responsible for 

damage or injury caused by improper installation, improper use or failure to observe these 

safety instructions. In such cases, all guarantees will expire. 

 

General 

 

Great care must always be taken during installation as most AV equipment is of a fragile 

nature, possibly heavy and easily damaged if dropped. 

If you do not fully understand the instructions or are not sure how to install this product safely, 

then please consult a professional for advice and/or to install this product for you. Failure to 

mount this product correctly may cause serious injury or death both during installation and at 

any time thereafter. 

Do not mount any AV equipment that exceeds the specific weight limit of the product you are 

installing. This weight limit will be clearly stated on each product and its packaging and will 

vary from product to product. 

 

Product location 

 

Please pay careful attention to where this product is located. Some locations are not suitable 

for installation. 

If located in a public or frequently populated area ensure that the product is out of the 

immediate reach of people.  

 

Fixing hardware 

 

It is highly recommended that all wall fixing screws be used where supplied and that the 

purpose of all other fixing hardware is fully understood. In some cases more AV equipment 

fixing hardware will be supplied to accommodate different models of equipment and set up 

configurations. 

The installer must be satisfied that any supplied fixing hardware is suitable for each specific 

installation. If any fixing screws or included hardware are deemed not sufficient for a safe 

installation then please consult a professional or your local hardware store. 

 

Hazard limitation 

 

When routing cables take advantage of any built in cable management features that the 

product might provide and ensure that all cables are tidy and secure. Check to see that any 

moving aspect of the product can do so unhindered by any cabling. 

Some products have moving parts and the potential to cause injury through the crushing or 

trapping of fingers or other body parts. 

Particular attention to the nature of moving parts is required especially when assembling 

installing and adjusting during set up. 

Immediately after installations double-check that the work done is safe and secure. Double-

check all necessary fixings are present and are of ample tightness. 

It is recommended that periodic inspections of the product and its fixing points are made as 

frequently as possible to ensure that safety is maintained. If in doubt consult a professional AV 

installer or other suitably qualified person. 

 

CAUTION:

This stand is intended for 

use only with the maximum weights indicated. 

Use with speakers heavier than the maximum indicated 

may result in instability causing possible injury.

Summary of Contents for Mountlogic BT606













Reviews: