8
3
Mounting the Ceiling Plate to Ceiling / Wall
10mm
Leave 10mm gap
for next step
CEILING
Twist
Twist
i. Pre-drill holes for ceiling fixings.
ii. Assemble two fixing screws in place, corner to corner leaving a 10mm gap
between the screw head and ceiling.
iii. Hook item 1 onto the fixing screws and twist into position.
B-Tech highly recommends this product be installed by a suitably qualified person.
The installer must be satisfied that the types of fixings used are suitable for the type of ceiling the product is to be mounted to.
Care must be taken as to where this product is located, as some ceilings and walls are not suitable for installation.
When drilling holes, knowledge must be obtained to avoid contact with any electrical cables and/or gas and water pipes contained
within the ceiling or walls.
IMPORTANT
Ceiling plate dimensions
are available on page 15
1
A1
Summary of Contents for BT899XL-FD
Page 2: ......
Page 3: ......
Page 9: ...9 iv Assemble the remaining two fixings to secure the ceiling plate A1...
