B-Tech BT8569 Installation Manual Download Page 2

2

INSTALLATION SAFETY INSTRUCTIONS

CAUTION:

Do not attempt to install this product until all instructions and warnings have been read and properly understood.

Please keep these instructions for future reference. 

Please check carefully to make sure there are no missing or defective parts - defective parts must never be used.  
B-Tech AV Mounts, its distributors and dealers are not liable or responsible for damage or injury caused by improper installation, improper use or failure 
to observe these safety instructions. In such cases, all guarantees will expire.   

General

B-Tech AV Mounts recommends that a professional AV installer or other suitably qualified person install this product.  Great care must always 
be taken during installation as most AV equipment is of a fragile nature, possibly heavy and easily damaged if dropped. If you do not fully
understand the instructions or are not sure how to install this product safely, then please consult a professional for advice and/or to install this 
product for you. Failure to mount this product correctly may cause serious  injury or death both during installation and at any time thereafter.
Do not mount any AV equipment that exceeds the specific weight limit of the product you are installing. This weight limit will be clearly 
stated on each product and its packaging and will vary from product to product. 

 

Product location

Fixing hardware

It is highly recommended that all fixing screws be used where supplied and that the purpose of all other fixing hardwareis fully understood. 
In some cases more AV equipment fixing hardware will be supplied to accommodate different models of equipment and set up configurations. 
The installer must be satisfied that any supplied fixing hardware is suitable for each specific installation.If any fixing screws or included
hardware are deemed not sufficient for a safe installation then please consult a professional or your local hardware store.

Hazard limitation

When routing cables take advantage of any built in cable management features that the product might provide and ensure that all cables are tidy and secure.
Check to see that any moving aspect of the product can do so unhindered by any cabling. Some products have moving parts and the potential to cause 
injury through the crushing or trapping of fingers or other body parts. Particular attention to the nature of moving parts is required especially when 
assembling installing and adjusting during set up. Immediately after installation double-check that the work done is safe and secure. Double-check all 
necessary fixings are present and are of ample tightness. It is recommended that periodic inspections of the product and its fixing points are made as
frequently as possible to ensure that safety is maintained. If in doubt consult a professional AV installer or other suitably qualified person.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience 
and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision

                                         This mount is intended for use only with the maximum weights 
indicated. Use with equipment heavier than the maximum indicated  may result in
instability causing possible injury.  

Please pay careful attention to where this product is located, some locations are not suitable for installation. For indoor use only.

Warning: 

The trolley can tip over which may lead to serious injury. Only adults should push this trolley, do not allow children under 16 to move the trolley. 

Push the trolley on the narrow side, never pull the trolley. Do not push at the top of the trolley, push near the middle. Move the trolley slowly. Always 
park on level ground, never leave the trolley on an incline. Apply the brakes when the trolley is stationary, release the brakes when pushing the trolley. 
Install stand on level ground. When verifying the stability of the structure, consider the following external factors: The strength of the floor, exposure to 
sudden and severe wind and danger arising from contact with people  and / or objects (eg installations in passageways, emergency exits), if located in a 
public or frequently populated area ensure that the product is out of the immediate reach of people.  

CONTENTS

Installation Safety Notes......................................................................................................................
Parts List....................................................................................................................................................
Installation Instructions.......................................................................................................................
Operating Console System...............................................................................................................
Product Dimensions............................................................................................................................
B-Tech Contact Details.......................................................................................................................

2
4
6

15
18
20

DANGER:

 To reduce the risk of an electric shock always:

•    Turn off power at source before cleaning.
•    Do not use near water or outdoors.

WARNING: 

To reduce the risk of burns, fire, electric shock, or injury to persons:

•    Unplug from outlet before putting on or taking off parts.
•    Protect any cables or cords being used near this equipment from being walked on or pinched.
•    Clean only with a dry cloth and always unplug any electrical items being used in conjunction with this product before cleaning.
•    Never operate this mounting system if it has a damaged cord or plug, if it is not working properly, if it has been dropped 
     or damaged, or dropped into water.  Return the mounting system to a service centre for examination and repair.
•    Keep the cord away from heated surfaces.
•    Never drop or insert any object into any opening.
•    Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
•    To disconnect, turn all controls to the off position, then remove plug from outlet.

WARNING: 

Use this mounting system only for its intended use as described in these instructions. 

Do not use attachments not recommended by the manufacturer.

WARNING: 

Never operate the product if it is damaged in any way, liquid has been spilled or objects have 

fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, 
or has been dropped. Contact the original  installer/manufacturer to arrange repair or return.

NOTE: 

BT8568 has no user serviceable parts.

NOTE: 

BT8568 can support screen sizes up to a maximum of 86 inches (diagonal).

CAUTION: 

Changes or modifications to this unit not expressly approved by the manufacturer can void the units 

CE certifications and make the unit illegal to operate.

Summary of Contents for BT8569





















Reviews: