8
i. Insert the joining bars (item C7) halfway into
the non-threaded end of the column (item C1).
The two joining bars with grub screws (item C8)
go in the front of the column and the 2 joining
bars with hex bolts (item C9) go in the back.
IMPORTANT:
Joining bars should be
inserted into the non-threaded end of
the 180cm column.
x
THREADS
THREADED
C1
C7
OPTIONAL: EXTENDING THE COLUMNS
ii. The two joining bars with grub
screws in the front of the column.
The two joining bars with hex
bolts in the rear of the column.
C1
C1
C7
Tighten hex bolts by hand.
Finish tightening using a
10mm spanner.
Back of Column
Front of Column
