After pairing, you can use B-Speech® TX4 with the Bluetooth receiver. If you wish
to use B-Speech® TX4 with another receiver, you need to pair them also.
In this case, B-Speech® TX4 will not re-connect with the previous device until you
pair them again.
The pairing process
1. Before pairing, please check that both devices are fully charged.
2. Check that both devices are within 3 meters of each other.
3. Turn the Bluetooth receiver on and make sure it is in pairing mode. (If in doubt,
read your receiver user guide).
4. Turn the TX4 on by pressing the On / Off button. The red and blue LED flashes
alternating for 6 seconds; the TX4 is in pairing mode.
5. Both devices should now find each other and pair. The red and blue LED on the TX4
flashes slowly at same time when the pairing is successful.
Playing music
1. Insert the connector of the turned on B-Speech® TX4 into the 3,5 mm socket of the
source device.
2. Make sure the receiver is turned on and within10 meters of the B-Speech® TX4.
3. The red and blue LED from the B-Speech® TX4 indicates that a Bluetooth
connection exists by flashing slowly at same time.
4. If the connection disappears, the sound is disrupted or breaks down: Move the
receiver nearer to the TX4. Put the receiver in search mode and it will connect again
automatically. If the connection does not automatically follow, start the pairing process
again.
Please note:
1. If for any reason the B-Speech® TX4 does not play any music, it should be restarted.
(See chapter about pairing.)
2. Normally, the connection between the transmitter and the receiver is established
once the pairing process is done.
The connection can break for the following reasons:
- The distance between the devices is greater than 10 meters or an obstacle stands
between the devices.
- One or both of the devices have been turned off or must be recharged.
To start the search or pairing function again put the Bluetooth receiver in search mode
or start the pairing process.
Technical data:
• Range 30~~100 meters
• 3.5mm audio Jack, swivel up to 270 Deg.
• 170mAh Rechargeable Li-polymer battery, up to 10 hours
operation time
• Superior audio performance using aptX® Hi-Fi quality stereo
codec
• Ultra-low power comsuption
• High quality stereo output
• High performance stereo
Registration and Safety
Certifi cation/General Information
We hereby declare, that this device carries the CE mark in accordance with the
regulations and standards.
It conforms with the fundamental requirements of the R&TTE- (1995/5/EC), EMC
directive 2004/108/EC as well as the Low Voltage Directive 2006/95/EC.
You can fi nd the complete declaration of conformity under www.b-speech.com.
Note on environmental protection:
After the implementation of the European Directive 2002/96/ EU in the
national legal system, the following applies: Electrical and electronic devices
may not be disposed of with domestic waste. Consumers are obliged by law
to return electrical and electronic devices at the end of their service lives to
the public collecting points set up for this
purpose or point of sale. Details of this are de fined by the national law of the
respective country. This symbol on the product, the instruction manual or the package
indicates that a product is subject to these regulations. By recycling, re-using the
materials or other forms of utilising old devices, you are making an important
contribution to protecting our environment.
FCC Information
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received; including interference that may cause undesired
operation.
Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
Tested to comply with FCC standard. FOR HOME OR OFFICE USE.
Warning :
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. &
This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter.