B-Speech®Nemo
Manual
Make a call
You can make calls from your mobile phone, or directly from the headset using
voice dialing and last number redialing (if it’s supported by the phone)
To make calls from your mobile phone - Dial the call from your mobile phone and the call is
automatically connected to your Headset.
To make calls using voice dialing (if supported by your mobile phone) - With the headset in
standby mode, press (click) the Talk button on the Headset, and you will hear the “Voice Dial” tone
(Two short beeps). Speak the name of the person you wish to call. The call is automatically
connected to your headset.
To make calls using last number redial (if supported by your mobile phone) - Whilst in standby
mode, press and hold the Volume “+” more than 4 seconds, and you will hear a “Last Number Redial”
tone (single long beep); Release the Volume “+” button, the call is automatically connected to your
mobile phone.
Note: This function only works on Bluetooth phones that support Handsfree profile.
Call transfer
When in conversation, you may transfer the voice from headset to phone or from phone to headset.
Press the Volume Up button for 3 seconds to make the transfer.
Note: This function only works on Bluetooth phones that support Handsfree profile.
For some cell phones (Sony Ericsson phones, for example), you can only transfer from the
headset to the phone, not vice versa. If this is the case, you must end the call from the cell phone.
Speaker volume control button
To increase the volume - While in talking mode, press (click) the Volume button + to increase
volume by 1 step, repeat this procedure until you have reached the desired level.
To decrease the volume - While in talking mode, press (click) the Volume button - to decrease
volume by 1 step, repeat this procedure until you have reached the desired level.
Mute functiont
You can mute and un-mute the microphone temporarily so that you cannot be heard by the
connected party.
To mute the headset – While in talking mode, press and hold the volume button “+” and volume
button “-” concurrently more than 3 seconds, and you will hear a MUTE tone (Single beep), the
microphone is muted.
4 / 6
