B-Speech®Medo
Manual
Transfer a call
You can transfer a current call directly to your phone. Press for 3 to 4 seconds the main button during
the call until hearing a beep.
** No all the Bluetooth phones support this feature. If it is the case with your phone, pressing
the main button may end the call and not transfer it to the phone.
Connect with a PC or PDA
You are allowed to connect the Headset with a Bluetooth enabled PC or PDA that is with Audio
Gateway Profile supported. Please refer to the user manual of your Bluetooth enabled PC or PDA for
a setup information.
Important Information
Trouble shooting
1. No indication of charging is shown.
If the Headset battery that is empty or has not been used for a long time, it may take a couple
minutes for the Headset indicator to show charging status with a steady red light.
2. If you cannot connect the Headset to your phone.
- Make sure that the Headset is switched on and paired with your phone.
- Make sure that Bluetooth feature is activated on your phone.
- Check that the Headset is within a maximum of 10 meters of your phone and that there are no
obstructions, such as walls, or other electronic devices between the Headset and the phone.
Notice for maintenance
- Keep the Headset dry. Precipitation, humidity and all types of liquids or moisture can
contain minerals that will corrode electronic circuits.
- Do not use or store the headset in dusty, dirty areas. It moving parts can be damaged.
- Do not store the headset in hot areas. High temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain plastics.
- Do not store the headset in cold areas. When it warms up, moisture can form inside, which
4 / 6
