6
Table 4: Plumbing Connections
Water Inlet (WI)
Gas Inlet (GI)
Water Outlet/Waste (D)
Connection
Position from
Position from
Position from
Floor
Rear of Appliance
LHS/RHS edge
(mm)
(mm)
of Appliance
(mm)
½
” Copper
290(+/-5)
70 (+/-5)
170 (+/-5)
¾
” male BSP
320 (+/-5)
45 (+/-5)
95 (+/-5)
2
” BSP
410 (+/-5)
770 (+/-5)
110 (+/-5)
Figure 3: Plumbing Connections:- VUFWWSP-1
Table 5: Plumbing Connections
Water Inlet (WI)
Gas Inlet (GI)
Water Outlet/Waste (D)
Connection
Position from
Position from
Position from
Floor
Rear of Appliance
LHS/RHS edge
(mm)
(mm)
of Appliance
(mm)
½
” Copper
430(+/-5)
80 (+/-5)
120 (+/-5)
¾
” male BSP
290 (+/-5)
65 (+/-5)
75 (+/-5)
2
” BSP
490 (+/-5)
690 (+/-5)
150 (+/-5)
IMPORTANT WARNINGS
THIS APPLIANCE SHALL ONLY BE INSTALLED/SERVICED BY
AN AUTHORISED INSTALLER.
THIS APPLIANCE MUST BE INSTALLED IN ACCORDANCE
WITH THE SPECIFIED INSTRUCTIONS AND SPECIFICATIONS.
IMPROPER
INSTALLATION
OR
OPERATION
OF
THIS
APPLIANCE MAY RESULT IN PRODUCT FAILURE WHICH MAY
LEAD TO PROPERTY DAMAGE, PERSONAL INJURY OR
DEATH.
CAUTION MUST BE TAKEN WHEN OPERATING THIS
APPLIANCE TO MINIMISE RISK OF FIRE. THE APPLIANCE
MUST NOT BE LEFTON UNATTENDED.
REGULAR INSPECTIONS BY AN AUTHORISED SERVICE PERSON ARE STRONGLY RECOMMENDED
TO ENSURE PROPER AND SAFE FUNCTIONING OF THIS APPLIANCE.
AFTER ANY SERVICING OR ADJUSTING OF GAS CONNECTED COMPONENTRY, GAS LEAK TEST
