Installation Manual
PAFB-1C Mountain Front Bumper with Skid Plate (Axys)
Page | 4
5.
Removing the OEM front bumper
5.2.
Remove the spring (Figure 5).
5.3.
Unscrew the three bolts holding the bumper in place (Figures 5, 6 and 7) and set aside.
5.4.
Unscrew the two Torx bolts on each side (Figures 9 and 10) and set aside.
5.5.
Remove the spare belt bracket (Figure 11).
5.6.
Remove the bumper.
(Figure 5)
(Figure 6)
