b-mola BM10, Operation Manual

Page: 13 / 16

Getting Started
Operation Method:
A. Put the unit on a flat surface
Operating Instructions
Getting Started
Operating Instructions
◎ ON / OFF Button
After connecting unit with power supply, press ON / OFF
Button to switch on unit. The white light indicates the unit
operates with Silent Mode.
◎ LED Indicator
Fan Speed
Highest
Lowest
Running & Charging
Running & Charging
Low Power
Low Power
Blue
Indicator
White
Indicator
Slow Flash Fast Flash
When the power ON/OFF indicator flashes in different
colours, they indicate following situations:
First, insert the Type-C connector of the power cord into the Type-C jack at the bottom of the unit.
Insert the other end of the power cord into the plug of the car charger, and then insert into
the charger socket.
It is not recommended put the unit on the car dashboard, where the surrounding higher
temperature may damage the built-in battery.
(No car charger will be provided.):
◎ Memory Function
When the external power supply is stopped or
interrupted unexpectedly, the unit will automatically
transfer to its internal battery power supply. When the
battery is exhausted and the unit stops running, it will
memorise the operation mode and will return to the
previous mode when external power is reconnected to it.
■When the indicator flashes white and then blue
alternately, it indicates that the unit is off and is
charging.
■If the filter set should not be installed into the unit, a 'DiDiDi' alarm sound will be heard
from the unit. Please ensure that the filter set is proerly installed prior to switching the
unit on.
■When first switched on there will be a slight mineral smell. This is perfectly normal and is
due to special manufacturing technique of the NCCO Reactor. The smell is harmless and
will disappear after a period of time operating the unit.
■ Please check and ensure that the car power supply is correct. The power input of this unit is
DC5V 2A.
■ Prior to installing and operating the unit in car, please make sure that the power supply has
been disconnected and lift it up carefully.
Press ON / OFF Button again, the unit operates with High
Flow Mode indicated by blue light.
Press ON / OFF Button for the third time to switch off unit.
The unit is designed with memory function to memorize
the last operation mode before switching off.
In-Car Installation
ATTENTION
08 09