Preparation before use
Installing the SIM card
Your phone will not work without the SIM
card. The Subscriber Identity Module (SIM)
card identifies you to the wireless network.
1 Remove the back cover by pulling the
tab upward.
2 Insert the SIM card into the slot, with
copper contacts facing down the pins
as shown.
Installing the Memory card
Your phone has a slot for a micro SD flash memory card.
Insert or remove the SD card:
•
To insert an SD card, push the card
into the slot, copper contacts facing
down. Push the card gently in until
it locks into place.
• To remove an already-installed SD
card, pull out the card gently with
y our fingertip.
Installing the battery
1
Insert the battery and make sure that the terminals on the
battery aligns with the metal contacts on the phone.
2
Replace the back cover and push until the locking tabs clicks
into
place.
User Manual QS-150
6
