![background image](http://html1.mh-extra.com/html/b-meters/hydroclima-2/hydroclima-2_user-manual_3069919007.webp)
5
HYDROCLIMA 2 - User Manual
Display
To present the data, a digital display with icons is available. A full lines test of the display is presented below:
The heat cost allocator shows data in two modes, a basic mode and an extended one:
Basic mode - data is displayed as a loop repeated three times.
The following table represents a cycle of displaying information on recorded data and errors.
Extended mode - can be entered exclusively during an active basic mode. Three cycles of the expanded loop are
displayed and subsequently the device goes back in stand-by mode.
→
Basic mode
takes place by short-time pushing of the button (
not exceeding 2 sec.
);
→
Extended mode
takes place by pushing of the button
exceeding 3 sec
.
Item
Conditionally
Message
Time in s
Description
1
“C”
3
Present data
2
“U”
3
Data (results) for a terminated clearing period
3
“ ”
3
Average ambient temp. for a terminated period
Total
9
Item
Conditionally
Message
Time in s
Error
1
“C”
2
Present data
2
“U”
2
Data (results) for a terminated clearing period
3
“ ”
2
Average ambient temp. for a present period
4
“ ”
2
Average ambient temp. for a terminated period
5
“IP”
2
The first adjustment coefficient (KC)
6
“2P”
2
The second adjustment coefficient (KQ)
7
“1”
2
Beginning date of a clearing period
8
“2”
2
Closing date of a clearing period
9
“H”
2
Control code
10
2
Serial number (last 6 digits)
Total
20
Summary of Contents for HYDROCLIMA 2
Page 1: ...v 1 0...
Page 12: ...10 HYDROCLIMA 2 User Manual Dimensions and drawings...