Hydrocal M3 User Manual v1.8
ENG - 14
Confirm the selected parameter by holding the T2 button for more than 3 seconds, thus moving to the
next parameter.
3) The third parameter that has be configured is the pulse value "k" of the C2 cold/hot water meter.
The value can be selected by using the button T1: 0.1–0.25–1–2.5–10–25–100–250–1000 L/imp
Confirm the selected parameter by holding the T2 button for more than 3 seconds, thus moving to the
next parameter.
4) The fourth parameter that has be configured is the update of the consumption data reported on the
C2 hot/cold water meter dial. Select the digit using the T2 button and change the single numbers with
the T1 button.
Confirm the selected parameter by holding the T2 button for more than 3 seconds, thus moving to the
next parameter.
5) The fifth parameter that has be configured is the pulse value "k" of the OC pulse heating output (hot
out). The value can be selected by using the button T1: 0 - 1 - 10 – 100 - 1000 kWh/imp
Confirm the selected parameter by holding the T2 button for more than 3 seconds, thus moving to the
next parameter.
6) The sixth parameter that has be configured is the secondary address of the Wired M-Bus (M-Bus) of
the heating data. Select the digit using the T2 button and change the single numbers with the T1 button.
