B-K Medical Pro Focus 2202, User Manual

Page: 291 / 356

3D Imaging 291
Endocavity Rotational Mover (ECRM)
The ECRM is a probe positioner that rotates an endocavity transducer about its long
axis, creating a fanned data set. This positioner is for use with the 8658 biplane
transducer.
The ECRM consists of:
•
a computer-controlled mover (UA0550)
•
a transducer cradle (UA0551)
Figure 20-2. The ECRM.
Caution: The cradle is specifically designed for the 8658 transducer. Do not
interchange transducers and cradles.
Setting Up the ECRM
To attach the cradle to the mover:
1 Use the 2 alignment pins to attach the cradle to the mover.
2
Tighten the captured screw to hold the cradle and mover firmly together.
Figure 20-3. Attaching the cradle to the mover.
To detach the cradle from the mover:
•
Turn the screw counterclockwise until the 2 components separate.
The transducer should fit tightly into the cradle (see Fig 20-5).
To mount the transducer:
1
Slide the 8658 transducer into the cradle while you align the pin on the
transducer with the groove on the cradle.
2 Make sure that the transducer is fully inserted in the groove.
WARNING Do not put your fingers where they can be pinched when the mover moves
back toward you.
Captured screw