manualshive.com logo in svg

B-K Medical Pro Focus 2202, User Manual, Page: 154 / 356

Share
Download
B-K Medical Pro Focus 2202 User Manual Download Page 154

154 Chapter 11 

 

Figure 11-1. The Doppler indicator (line and gate) superimposed on a B-mode image.

The dotted line represents the Doppler line. The lines at right angles to that show the 
Doppler gate.

Fig 11-2 shows information available in Doppler indicators.

Figure 11-2. Doppler indicators (three examples).

A diagonal line (relative to the Doppler line) indicates a sample volume with angle 
correction (see “Angle Correction” on page 156). The thick lines are areas in which 
no Doppler information is available and the horizontal dotted lines show the false 
sample volume in HPRF (see page 157).

To turn off Doppler mode:

•

Press 

[

k

]

 or 

[

f

]

.

Doppler line

Doppler gate

(sample volume)

angle correction line

no Doppler information 
from here

false sample volume

Summary of Contents for Pro Focus 2202





































































































































































































































































































































































Reviews:

No comments