RELEASE DATE
9-8-15
REFERENCE
NUMBER
INS000968
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
PROJECT:
TYPE:
Finished grade
Finished grade
12”
2 window
faceplate
shown
Finished grade
LINE
12V
FIXTURE
COM
Remote
Transformer
COM
2 window
faceplate
shown
Optical opening on
faceplate will align with
alignment arrows on
temporary cover
Optical opening on
faceplate will align with
alignment arrows on
temporary cover
Pea gravel or sand
Finished grade
Dirt or soil
Stability flange
Rebar or stake (by others)
Pea gravel or sand
Finished grade
Concrete
Finished grade
Finished grade
Pea gravel or sand
Finished grade
Dirt or soil
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
Finished grade
Finished grade
12”
2 window
faceplate
shown
Finished grade
LINE
12V
FIXTURE
COM
Remote
Transformer
COM
2 window
faceplate
shown
Optical opening on
faceplate will align with
alignment arrows on
temporary cover
Optical opening on
faceplate will align with
alignment arrows on
temporary cover
Pea gravel or sand
Finished grade
Dirt or soil
Stability flange
Rebar or stake (by others)
Pea gravel or sand
Finished grade
Concrete
Finished grade
Finished grade
Pea gravel or sand
Finished grade
Dirt or soil
12"
(305mm)
(2) Stainless Steel flat Head
Hex Head Screws Block Oxide
6" Dia.
(152mm)
.120" Wall,
Steel Housing
(152mm)
6" Dia
12"
(305mm)
(152mm)
6" Dia
For Remote Transformer
See Sheets TRSS Series, TR Series,
Power Pipe, Power II or Power
Canopy in Accessory Section.
Tempered Glass Lens
Cast Iron Well Cover
(Cast 35, Gray Iron-ASTM A43)
4 3/8" O.C.
(111mm)
5’
(1524mm)
12 Ga.
2 low voltage
direct burial
cable
WELL STAR™
Installation Instructions
TECHNOLOGY
with
TECHNOLOGY
4. Insert fixture housing and low voltage wire into
trench.
5. Back fill with pea gravel or sand to allow
sufficient drainage. Install housing flush at
grade. Install faceplate with (2) 1/4-20 screws
using a 3/16” Allen wrench.
2.
Supply low voltage wiring necessary for
installation (By Others).
See wiring diagram.
NOTE: Leave sufficient wire length in the
fixture housing for future service.
Finished grade
Finished grade
12”
2 window
faceplate
shown
Finished grade
LINE
12V
FIXTURE
COM
Remote
Transformer
COM
2 window
faceplate
shown
Optical opening on
faceplate will align with
alignment arrows on
temporary cover
Optical opening on
faceplate will align with
alignment arrows on
temporary cover
Pea gravel or sand
Finished grade
Dirt or soil
Stability flange
Rebar or stake (by others)
Pea gravel or sand
Finished grade
Concrete
Finished grade
Finished grade
Pea gravel or sand
Finished grade
Dirt or soil
Finished grade
8 3/4”
2 window
faceplate
shown
Finished grade
8 3/4”
LINE
12V
FIXTURE
COM
Remote
Transformer
COM
Optical opening on
faceplate will align with
alignment arrows on
temporary cover
Optical opening on
faceplate will align with
alignment arrows on
temporary cover
Stability flange
Rebar or stake (by others)
Pea gravel or sand
Finished grade
Concrete
Stability flange
Rebar or stake (by others)
Pea gravel or sand
Finished grade
Concrete
Finished grade
Concrete
Wire nuts must
clear opening
6”
min.
1. Excavate trench according to designed lighting
plan, 20” deep and 10” wide suitable for the 13”
fixture housing.
3. Make watertight connections using proper
waterproof connectors (By Others) from remote
transformer to fixture leads.
Finished grade
Finished grade
12”
2 window
faceplate
shown
Finished grade
LINE
12V
FIXTURE
COM
Remote
Transformer
COM
2 window
faceplate
shown
Optical opening on
faceplate will align with
alignment arrows on
temporary cover
Optical opening on
faceplate will align with
alignment arrows on
temporary cover
Pea gravel or sand
Finished grade
Dirt or soil
Stability flange
Rebar or stake (by others)
Pea gravel or sand
Finished grade
Concrete
Finished grade
Finished grade
Pea gravel or sand
Finished grade
Dirt or soil
& Low Voltage
WIRING DIAGRAM
