RELEASE DATE
01/18/2021
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
REFERENCE NUMBER
INS-2841-00
2. Use a 5/16” allen wrench to loosen three
(3) #8-32 stainless steel set screws
(do not
remove set screws from fixture)
. Remove
anchor base from the fixture.
Finished Grade
1. Drive the stake into the ground with a mallet or
a small sledge hammer (by others). Make sure
the top is flush with the finished grade.
Remote Installation
3. Attach the anchor base to the threads on the
stake. Make sure the stake is secured in the
ground.
6. Make watertight connections from remote
transformer to fixture leads using waterproof
wire connectors (by others).
See wiring
diagram.
Finished Grade
4. Pull low voltage, typically direct burial cable
throught the stake center where the hole is
located to make the connect with the fixture.
Ground wire connections is based off of
local code requirements.
7. Install fixture onto anchor base.
Do not pinch
wiring.
Secure fixture by tightening three (3)
stainless steel set screws on fixture knuckle
using a 5/64” allen wrench.
Do not overtighten
set screws.
Remote
Transformer
Low Voltage
Installation Instructions
GARDEN STAR (GR)
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION
INSTRUCTIONS
LINE
12V
Fixture
COM
Remote
Transformer
COM
WIRING DIAGRAM
For use with 12VAC remote transformer.
