B-hyve HT25, Manual

Page: 15 / 21

Known Bugs
One of the challenges of this product is that the HT25 will hold it's program until the batteries
die. So, if a user unplugs their BH1 but leaves the HT25 connected, it will continue to run until
the batteries die. When shutting the system off, either remove the batteries or turn off the
water to the timer.
Bootloader mode - Sometimes the timer fails to update the firmware and gets stuck in
bootloader mode, the light flashes white indicating that the timer cannot be used. If the device
is still attached to their account, the customer may be able to resolve it themselves. Try going to
settings > Devices > Select the timer > Update Firmware.