22. LED function displays
LED function indicators after each mains recovery (60 sec. initialisation period)
Operating state
LED function indicators
Factory program
active
White, red and green flash in quick succession for 10 sec., then initialisation indicators,
see below
Double-locked
white and green shines for 5 sec. all 20 sec., afterwards initialising notification
Indicator
unprogrammed
Indicator
programmed
Indicator also when forced shutdown
is activated
Standard mode
Red flashes
Red flashes quickly
Every 5 sec., 4 x white, red and green
in quick succession
Corridor active
Red and white flash Red and white flash
quickly
Every 5 sec., 4 x white, red and green
in quick succession
LED function indicators during operation
Process
LED function indicators
Motion detection
Red flashes on each detected movement
Semi-automatic mode
active
White is ON
Too bright detected
Green flashes
Light measurement
active
Green flashes once every 10 sec.
Corridor active
White ON 1 sec. and OFF 4 sec.
Corridor and
semi-automatic mode
active
White ON 4 sec. and OFF 1 sec.
Duration ON active
(by slave)
Red flashes quickly
IR command
White flashes once
IR command „Open“
and sabotage active
White and green flash once slowly
MAN 7
47
2
–
19
061
3–
2
* Indication for channel 1 and/or 2. By pushing during open state can each be evaluated for
which channel the indication is valid.
2
1
IR command
Process
LED function indicators
Semi-automatic mode
(HA) active
red, green and white LED flashe once
Fully-automatic mode
(VA) active
white LED flashes once
Mixedlight measure-
ment (MIX) active
white LED flashes once
Daylight measure-
ment (DAY) active
red, green and white LED flashes once
