B.E.G. LUXOMAT PD4-M-2C-DS, Installation And Operating Instruction, Page: 4 / 4

23. PD4-M-2C-DS-FC - Connection 24. LED function indicators in master-configuration (default)
M
A
N 7
77
3
–2
40
11
4–
6
Optional
PB = optional button;
Slave = Device in slave configuration
LED function indicators during operation
Incident Function indicator LED
Error indicator -
defective master-slave
communication
Permanent red light
Motion detection Green flashes when motion is detected
Error indicator - con-
nection error BEG bus
Permanent red and white light
24. LED function indicators in slave-configuration
LED function indicators after each mains recovery (60 sec. initialisation period)
Operating state LED function indicators
Factory program
active
White, red and green flash in quick succession for 10 sec., then initialisation indicators,
see below
Double-locked White and green shines for 5 sec. all 20 sec., afterwards initialising notification
Indicator
unprogrammed
Indicator
programmed
Indicator also when forced shutdown
is activated
Standard mode Red flashes Red flashes quickly Every 5 sec., 4 x white, red and green
in quick succession
12 h ON/OFF
active
Red and green
flash
Red and green flash
quickly
Every 5 sec., 4 x white, red and green
in quick succession
Corridor active Red and white flash Red and white flash
quickly
Every 5 sec., 4 x white, red and green
in quick succession
12 h ON/OFF &
corridor active
Red, green and
white flash
Red, green and white flash
quickly
Every 5 sec., 4 x white, red and green
in quick succession
CdS active – Red and white flash Then no red LED for motion detection
LED function indicators during operation
Process LED function indicators
Motion detection Red flashes on each detected movement
Semi-automatic mode
active
White is ON
Impulse active Red and green flash one time all 4 sec.
Corridor active White ON 1 sec. and OFF 4 sec.
Corridor and
semi-automatic mode
active
White ON 4 sec. and OFF 1 sec.
Too bright detected Green flashes
Light measurement
active
Green flashes once every 10 sec.
12 h ON/OFF func-
tion active
Red and green flash alternately
Duration ON active
(by slave)
Red flashes quickly
IR command White flashes once
IR command „Open“
and sabotage active
White and green flash once slowly
N2 L2 L2‘ L1‘ L1 N1 BEG-BUS
PBPB
+ –
L1
N1
L2
N2
Slave
!
PE
PE
PB
!
!