7. Option:
8. Settings by remote control when open
9. Description of the key functions
11. Manual Dimming – Preset / User
(for IR-PD-DALI functions see page 2)
You can dim manually by pressing the pushbutton for a long
time (> 2 sec.). When the button is released, the current dim-
ming value is retained. Upon renewed dimming, the dimming
direction is reversed.
PRESET
–
the luminance set point is set during start-up operation by
the installer and remains unchanged. The luminance set-point confi
-
gured through manual dimming is only applied for the time being.
Caution:
The constant light regulation is now deactivated! The currently set
artificial light is retained independent of the ambient/daylight
brightness! After switching off and then back on, the originally set
luminance set-point is reset = constant light regulation is activated.
USER
– can only be activated via the remote control!
The luminance set-point is changed upon each manual dimming
and re-adjusted by the user.
The constant light regulation remains activated!
The system switches over when the “Doublelock” push-button is
open (see remote control functions, page 1). Each time a push-
button is pressed, the current operating mode is indicated:
Red lights for 3 sec.
= Preset
Green lights for 3 sec.
= User
10. Fully / Semi automatic mode
(for IR-PD-DALI functions see page 2)
The system switches over when the “Light” push-button is
open (see remote control functions, page 1).
Each time a push-button is pressed, the current operating
mode is indicated by the red LED:
Red lights for 3 sec.
= Fully automatic mode
Green lights for 3 sec.
= Semi-automatic mode
Fully automatic operation
In this operating mode, the lighting switches automatically on
and off for increased comfort, depending on presence and
brightness.
Semiautomatic operation
In this operating mode, light can only be switched on manually
by switch/remote control and switched off automatically upon
time-out if vacant.
As many retractable switches as required can be wired in paral-
lel on the “S” input(ON/OFF/Dim).
IR-PD-DALI (27 buttons) can also be used to override the sensor
as well as IR-PD-DALI (32 button). However, IR-PD-DALI (27button)
can only override the lighting channel and HVAC run-on time
has to be set on the potentiometer 3. Whereas, IR-PD-DALI (32
buttons) can override both lighting channel and HVAC channel.
12. Manual Switching
You can switch the lighting on and off manually by pres-
sing the pushbutton for a short time. It will stay on or off
as long as people are detected plus the configured follow
up time.
max
50
Lux
1500
Lux
ON
OFF
max
50
Lux
1500
Lux
ON
OFF
max
50
Lux
1500
Lux
ON
OFF
13. Range of Coverage
PD4
24 m
8 m
6,40 m
24 m
360°
2,50 m
2
1
PD2
10 m
6 m
4 m
10 m
360°
2,50 m
2
1
1
2
quer zum Melder gehen
frontal zum Melder gehen
Unterkriechschutz
Walking across
Walking towards
Seated
14. PD2/PD4-M-DALI/DSI – Connections
Wall bracket for remote control
IR-PD-DALI
IR-PD-DALI
Unlocking device - Activation of
the programming mode
Locking device – Exit program-
ming mode
Resetting when
open:
Deletes
all values set
with the remote
control, light
OFF.
Follow-up time light
Orientation lighting on/off
Automatic reading in the
current light value as new
luminance set point
Permanent protection against
sabotage
LED flashes
or
Dimming of the lighting on the
desired luminance value
Adjusting of the luminance set point
+ / –
small steps
+
/
–
big steps
1
min
to
30
min
max
50
Lux
1500
Lux
ON
OFF
max
50
Lux
1500
Lux
ON
OFF
Switching between DSI and
DALI program
or
+
–
Fully automatic /semi automatic
mode => (see page 2, point 8)
Preset/user mode
=> (see page 2, point 9)
max
50
Lux
1500
Lux
ON
OFF
Orientation lighting and its
follow-up time
to
1
min
10
min
max
50
Lux
1500
Lux
ON
OFF
t < 5 sec.
Lock device
Test mode
Reset to deactivate
Resetting when closed
The lighting relay is switched off, i.e. opened and the
follow-up times reset.
Permanent protection against sabotage
This function blocks the unit permanently (green LED is illumi-
nated). This operating mode can only be activated during the
period of 5 seconds after pressing the “lock“ button. This status
will only permit actuating the function “Light on/Light off”.
The procedure for leaving this mode is as follows:
1. Switch off the current
2. Apply current for 31 – 59 seconds
3. Switch of the current again
4. Apply current
5. Open detector
Light on/off when closed
=> (see page 2, point 10)
The light will remain switched on/off for as long as movements
are detected in the areas of coverage. Once the last movement
has been detected, the light will remain on for the duration of
the follow-up time as per setting.
The appliance will then return independently to the mode
selected (Fully or Semi-automatic).
max
50
Lux
1500
Lux
ON
OFF
t < 5 sec.
L
N
L
N
R
R
Slave
Slave
L L
L
S
S
N N
N
–
–
+
+
R
R
T1
T1
DA +
DA –
DA +
DA –
PD2/PD4-M-DALI/DSI-SM
PD2/PD4-M-DALI/DSI-FC
DSI/
DALI
