5. ROUTER DESIGN
5.6
Removing from the DIN Rail
DIN holder is suitable for DIN rail according to EN 60715 standard only. Default position
of CKD-SBD23 holder, which is used for mounting the router on a DIN rail, is shown in the
following figure:
Figure 10: Default position of DIN holder
For removing from the DIN rail it is necessary to lightly push upward the router so that the
top part of the CKD-SBD23 holder hitched to the DIN rail get out of this rail and then fold out
the top part of the router away from the DIN rail.
Figure 11: Removing from the DIN rail
13
