5. CUSTOMIZATION
5. Customization
5.1
User Modules
You may run custom software programs in the router to enhance the features of the router.
Use the
User Modules
menu item to add new software modules to the router, to remove them,
or to change their configuration. Use the
Browse
button to select the user module (compiled
module has tgz extension). Use the
Add
button to add a user module.
Figure 72: User modules
The new module appears in the list of modules on the same page. If the module contains
an index.html or index.cgi page, the module name serves as a link to this page. The module
can be deleted using the
Delete
button.
Updating a module is done the same way. Click the
Add
button and the module with the
higher (newer) version will replace the existing module. The current module configuration is
left in the same state.
Programming and compiling of modules is described in the Application Note
Programming of
User Modules
Figure 73: Added user module
User modules can be custom-programmed. They can also be downloaded from company
web site (
). Here are a few examples of the user modules that are
available on the web site.
109
Summary of Contents for SmartMotion
