INSTRUCTION MANUAL
Technical changes reserved
B+B 0141 0315-21 June 2011
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon +49 771 83160 | Fax +49 771 831650 | [email protected] | bb-sensors.com
10 / 25
In later uses of the interface, Windows
®
may require
the driver installation again. In this case, the same
installation wizard will be displayed, and you will have
to select the option “Install software automatically
(recommended), as the driver may already be in the
computer.
Logchart-II Software installation:
1. Insert the supplied CD-ROM in the CD-drive of
the PC.
2. The software installation wizard will start automa-
tically. If it does not, please run the
„LC_II_Setup.exe“ program provided from your
CD-drive.
To do so, please follow the steps below:
• From the start menu of Windows run Windows
Explorer. Choose the CD drive
• Double click on the icon „LC_II_Setup.exe“ to run
the setup-program.
• Follow the steps described in the setup-wizard
8.2. Running LogChart-II
By starting the program, the main window will appear on
the screen:
The LogChart-II requires a communication port to talk to
the logger. Clicking on the menu Port, all free communication
ports available in the computer will be listed, including the
USB port if the driver is installed. Select one and connect the
corresponding wand to it. The chosen port will be remembe-
red next times the LogChart-II is initiated.
Displays the Config-
uration Setup dialog box
Press this button
to represent the last 10
measurements taken
Press this button to
the current contents of the logger
download store
Stops current
Measurements
6. If a prompt warns you that it does not support Windows
®
XP or that signature verification failed, click “Continue anyway”.
7.
The interface driver files will be copied to the computer and after a few seconds a screen is displayed informing you that the
software installation has been concluded. Click “Finish”.
8. In some situations, the steps described above may be repeated again. Follow the same procedures.