OPERATION MANUAL
Technical changes reserved
0141 0316-366 20.04.2016
HYTE humidity- and temperature-measurement system
wall mounting FF-GLT-10V-series
1
+DC 24 V
2
GND
2 HYGRO
4
TEMP
5
PT
6
PT
Pin Function Description
1
+DC/AC 24 V
Operating voltage
2
GND 0 V
Operating potential
3
Hygro 0...10 V
Humidity output 0...10 V
4
Temp. 0...10 V
Temperature output 0...10 V
5
Pt1000
Temperature sensor (passiv)
6
Pt1000
Temperature sensor (passiv)
The Pt1000 2-wire is looped through floating. The line resistance is
compensated. If desired, other resistors, for example, NTC sensors are,
possible!
The measurement of the output signal should be done with separate
signal ground, to avoid measurement errors due to voltage drop across
the supply ground.
For further information, please visit our website:
www.bb-sensors.com
Humidity measuring 0...10 V
and passive Pt1000 for temperature measuring
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon +49 771 83160 | Fax +49 771 831650 | [email protected] | bb-sensors.com
3 / 3
