![background image](http://html.mh-extra.com/html/b-b-sensors/eir-m-sc/eir-m-sc_quick-start-up-manual_460606001.webp)
1-888-948-2248 |
Europe:
+353 91 792444
advantech-bb.com
707 Dayton Road | PO Box 1040 | Ottawa, IL 61350
Phone: 815-433-5100 | Fax: 815-433-5109
www.advantech-bb.com | E-mail: [email protected]
Fast and easy on the web:
www.advantech-bb.com
QUICK START
GUIDE
Document Number: EIR-x-Sx Series_3117qsg
Recommended Accessories
Before you begin, be
sure you have the following:
Model EIR-M-SC,
EIR-M-ST or EIR-S-SC
10/100 to 100 Mbps Ethernet Media Converter
+ Ethernet Media Converter
+ Panel Mount Bracket
Power Supply –
24 VDC, 1.7 A Output Power
,
DIN Rail Mount
# MDR-40-24
(EIR-S-SC shown)
Troubleshooting Tips
7
•
Make sure the right type of fiber cabling is chosen for
the product you have purchased; single mode and
multi mode fiber operate in entirely different ways
•
CAT5 or higher is recommended for the copper port
cabling
•
Power must be removed before the media converter
is disconnected in hazardous environments for safety
reasons
•
Link Fault Pass Through is disabled by default. When
troubleshooting, set LFPT back to OFF.
•
If only one power supply is connected, the Fault LED
will remain ON. If connecting a second power supply
for redundancy, or connecting Power supply 1 to
Power supply 2, the Fault LED will extinguish.