![background image](http://html.mh-extra.com/html/b-b-sensors/0555-0035-01/0555-0035-01_operating-manual_460621008.webp)
TxRail-USB Temperature Transmitter
0555 0035-01, 0555 0035-02
0141 0315-951 27.09.2021
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
Seite
6
von
9
Technische Änderungen vorbehalten
Fon +49 771 83160 | Fax +49 771 831650 | [email protected] | bb-sensors.com
6.2.5
Output
7
C
ONFIGURATION
Changes to the configuration are possible through the TxConfig II software, provided free of charge. The transmitter configuration interface
(USB cable) can be purchased from the manufacturer or its authorized sales representatives.
The TxConfig II software is continuously updated, and new versions can be downloaded at no charge from the manufacturer’s website. To
install, execute the TxConfigIISetup.exe file and follow the instructions.
During the setup, the transmitter is powered by the USB, not requiring an external power supply. The transmitter setup can also be made by
connecting it to the loop, using the
loop
power supply. There is no electrical insulation between the transmitter and the communication port
(interface), therefore it is not recommended to configure it with the sensor inlet connected to the process. See
Fig. 2
After these connections, the user must run the TxConfig II software and, if necessary, consult the Help topic to help using the software
.
The USB communication port (interface) of the TxBlock-USB is not electrically insulated from the transmitter’s
input.
A
BBILDUNG
7
A
BBILDUNG
8
Strom (rechts) - Spannung (links)
A
BBILDUNG
9
USB cable connection