CAUTION: This dehumidifier is designed to meet
or exceed safety and performance standards for
dehumidification equipment. Use only
manufacturers’ replacement parts for service.
Use of aftermarket parts voids the product
warranty and all performance claims.
CLEANING
Electrical Shock Hazard
Turn unit OFF and Disconnect power supply
before cleaning. Failure to follow these
instructions can result in death, fire or electrical
shock.
External Cleaning
Use a non-flammable mild, non-abrasive soap and
clean water solution to clean the dehumidifier. Wipe
dry.
Internal Cleaning
Turn unit off and disconnect dehumidifier from power
supply. Clean the core with warm soapy water. Take
care to make sure the seal is good as any air
leakage will cause the unit to under-perform. Start
up the unit and listen for air whistling, if there are
any leaks, readjust the brackets.
STORAGE
Freezing temperatures and biological growth must
be considered before storing the dehumidifier. The
dehumidifier should be flushed with a bio fungicide
before storing. When storing the unit, ensure that
water has been removed from the reservoir and
hose. This will prevent damage caused by freezing
temperatures and to prevent biological growth. Use
the pump purge button to remove water and bio
fungicide chemicals from the dehumidifier.
STACKING
DO NOT STACK THE DEHUMIDIFIERS!
SERVICE
A qualified refrigeration technician must service all
refrigerant leaks.
WARNING:
The dehumidifier uses a high
pressure refrigerant system and high voltage
circuitry, which could present a health hazard,
resulting in death, serious bodily injury, and/or
property damage. Only qualified service people
should service this unit.
The serial data plate is located on the rear panel of
the dehumidifier.
For service information contact: 877.800.BAIR
(2247) or email [email protected]
