B-Air GRIZZLY GP-1 ETL Instruction Manual Download Page 3

B-AIR.COM

Storage

Store unit indoors, in a clean, dry environment to ensure long life.

Safety

1)    Keep children and pets away from unit when in operation and/or plugged in.

2)   Do not put fingers or other objects in unit while in operation and/or plugged in.

3)   To avoid electric shock, do not operate in pooled water.

4)   Unit must be kept dry at all times, including motor, wiring and exterior. If unit 

       becomes wet, thoroughly dry before next operation.

5)   Indoor use: Use only with a grounded plug and/or extension cord to avoid risk 

       of electrical shock or fire. Remember to never use a cord with any kind of   

       damage or wear. 

6)   Make sure the power source is sufficient to meet the requirements of the 

       dryer/air mover.

7)   To prevent overheating the unit, keep air intake clear at all times.

8)   Clogging or blocking the air intake could result in a fire or an electrical hazard.

9)   In order to avoid injury, do not remove any screens or safety guards from the 

       unit. Prevent objects from coming in contact with the dryer’s wheel. If the unit

       is damaged in this manner, it will void your warranty. 

10) Do not operate unit close to any hazard/dangerous areas: explosive gases, 

       flammables, heaters and unventilated environments to avoid explosions or

       electrical hazards.

11)  Do not use any form of speed control device; doing so may cause fire or injury.

12) Always place dryer/air mover on a smooth and level surface for safe operation.

13) Do not use unit if damaged.

14) Unplug unit before cleaning or servicing.

15) All dryers/air movers in operation must be supervised at all times.

16) Do not expose to rain, water or snow.

17) Unit must be connected to a GFCI (Ground Fault Circuit Interrupter) protected

      receptacle. 

Warning!

All dryers/air movers in operation must be supervised and attended to, at all times. 

The use of a 3-prong to a 2-prong adapter is prohibited; use only a 3-prong 

adapter.

If the power supply cord is damaged, it must be replaced by the manufacturer, its 

service agent or similarly qualified persons, in order to avoid a hazard. 

Limited Warranty

Proof of purchase is required on all warranty claims. 

2-year warranty

B-Air will cover all parts (except power cord) within two (2) years of purchase. 

B-Air will pay repair costs and one-way UPS ground service shipping to your 

location within the 48 contiguous states. Proof of purchase is required.

Summary of Contents for GRIZZLY GP-1 ETL









Reviews: