Features Continued
C. Add the T-Handle for the user if this grasp is more
comfortable. The T-Handle can be added to allow for left
(C.1) or right (C.2) handed users and can also adjust to allow
equal lengths (C.3) to each side of the cutter.
Features Continued
D. For a user who is unable or finds it difficult to grasp the
handle he/she may simply push Adapt-A-Cut®. The user
should gently push the tool by the dimple located close to the
bottom of the handle.
C.1
C.2
C.3
To add the T-Handle line up the groove with the bump inside
the hole of the Main Body handle (C.4). Slide the T-Handle
into the hole of the Main Body handle. Once the T-Handle is
in the correct position gently turn it and lock into place (C.5).
To change the T-Handle’s position reverse these directions.
The 1/2” Velcro can be added through the hole of the T-
Handle (C.6) for more control if needed. Again for comfort
place the softer side of the Velcro next to the user’s skin.
C.4
C.5
C.6
A user who cannot grasp the handle may also have
difficulties holding the paper that will be cut. Another person
will have to hold paper at the appropriate level in order for
the user to successfully cut the paper.
Adapt-A-Hold™ is a partner tool for Adapt-A-Cut® to allow
more independence by holding the paper for the user.
Please continue to check our website for other products.
