(B) START / STOP :
> Press once to begin or stop the curing cycle. At the last 3 seconds a “Beep” will sound
indicating that the cycle is almost finished.
The BA Ultimate LED is equipped with a special self-cooling system.
This completely shuts off the handpiece control panel to prevent overheating, after con-
secutively running 10 full curing cycles (of 30 seconds).
The machine should stay "off" for at least 6 minutes to allow complete cooling.
When repetitive curing process is required, please ensure the "time" for each curing
cycle is reduced.
The BA Ultimate LED is not suitable for the use in "Bleaching".
COOLING SYSTEM :
6
