B-52 LS-100: 100-WATT TRI-CHANNEL GUITAR AMPLIFIER
4
LS-100 FRONT PANEL CONTROLS
INPUT
ON
POWER
100
WATTS
RMS
TRI
-CHANNEL
LS 00
-1
GAIN 1
GAIN 1
GAIN
SELECT
GAIN 2
GAIN 2
BASS
BASS
GAIN 1
MIddLE
MIddLE
TREBLE
TREBLE
CONTOUR
CONTOUR
GAIN 2
vOLUME 1
vOLUME 1
vOLUME 2
vOLUME 2
CHANNEL
SELECT
0
10
BASS
BASS
0
10
0
10
MID
CUT
0
10
MIddLE
MIddLE
TREBLE
TREBLE
vOLUME
vOLUME
0
10
0
10
REvERB
vOLUME
MASTER
CLEAN CHANNEL
OvERdRIvE CHANNELS
vOLUME
0
10
0
10
0
10
0
10
0
10
0
10
0
10
0
10
INPUT
REvERB
1
2
3
4
5
6
7
8
9
10
11
12
13 14 15
16
17
18 19
20
21
1. POWER ON/OFF SWITCH:
Turns the LS-100
on and off.
2. MASTER VOLUME:
Controls the overall loudness of
the LS-100. To increase the overall volume, rotate the
control clockwise. The Master volume control allows
you to control the volume of both the Clean and
Overdrive Channels simultaneously.
3. MASTER REVERB CONTROL:
Adjusts the amount
of reverb produced by the amplifier. To increase the
amount of reverb, turn clockwise.
4. CLEAN CHANNEL – VOLUME:
Controls the overall
signal level of the clean channel.
5. CLEAN CHANNEL - MID CUT:
Pushed in, this
feature sets the perfect amount of midrange for a
truly pristine, almost acoustic-like sound.
6. CLEAN CHANNEL - TREBLE:
Adjusts the amount of
high frequency boost or cut as desired in the clean
channel. Treble adds brightness to your tone. Turning
this control clockwise will add clarity to your sound.
Turning the control counter-clockwise softens the tone.
7. CLEAN CHANNEL - MIDDLE:
Adjusts the amount
of mid-range frequencies as desired in the clean
channel. Turning the middle control clockwise will
increase the amount of warmth. Counterclockwise
settings create a more hollow, mid-scooped tone.
8. CLEAN CHANNEL - BASS:
Adjusts the amount of
low frequency boost or cut as desired. Adding bass will
increase the depth and fullness of your sound.
9. CHANNEL SELECT:
Push switch selects between the
clean and overdrive channels. Activated LED lights
indicate which channel is in use.
10. OVERDRIVE – VOLUME 2:
Controls the overall
volume of the high gain overdrive channel.
MINIMUM IMPEdANCE: 4 OHMS
SPEAkER OUTPUTS
CAUTION
RISK OF ELE
CTRIC SHOCK
DO NOT OPEN
WARNING:
To reduce the risk of electrical shock, do not expose this
equipment to rain or moisture. There are no user serviceable parts inside.
Refer all servicing to authorized personnel.
CAUTION:
To reduce the risk of fire replace only with the same type of fuse.
0
10
LEvEL
REvERB
CHANNEL
GAIN
FOOTSWITCH
0
10
LEvEL
0
10
LEvEL
RECORd OUT
EFFECTS LOOP
RETURN
SENd
SPEAkER
SIMULATEd
115v F4AL 200W
230v F2AL 200W
AC SELECT
22
23
24
25
26
27
28
29
30
31
32
LS-100 REAR PANEL CONTROLS
22. EFFECTS – RETURN LEVEL:
Controls the level of
the returning signal from an effects unit.
23. EFFECTS – RETURN JACK:
Connects the LS-100 to
the output of an effects unit.
24. EFFECTS - SEND JACK:
Connects the LS-100 to
the input of an effects unit.
25. EFFECTS – SEND LEVEL:
Controls the signal level
being sent to an effects unit.
26. FOOTSWITCH –REVERB:
Connects footswitch to
turn the reverb on/off
27. FOOTSWITCH – GAIN AND CHANNEL
SWITCH:
Switch between Gain 1 and Gain 2 in
the Overdrive channel. Also switches between clean
and overdrive channel.
28. RECORD OUT – LEVEL:
Controls the signal level
being sent to the PA or recording console.
29. RECORD OUT – SPEAKER SIMULATED:
This
output signal is pre-equalized to simulate the sound
