VIA 693/693A AT MAINBOARD
HARDWARE SETUP
3-1
3.
HARDWARE SETUP
Before you can start to install this mainboard, some hardware settings is required
to make sure it will work perfectly with the component which you are going to
install in your PC system. To configure this mainboard is a simple task, only a few
jumpers, connectors, cables and sockets need to be selected and configured.
Please refer to the following sections for the settings.
3.1
INSTALLING THE DRAM MODULES
This mainboard has three DIMM sockets designed on the mainboard and you can use
the single-side or double-side DIMM module on the mainboard.
RS
HL
BAT 1
+
-
DRAM Subsystem Diagram
DIMM 3 ( BANK4+ BANK5 )
DIMM 2 ( BANK2 + BANK3 )
DIMM 1 ( BANK0 + BANK1 )
Installation of DIMM modules:
1.
Outlook of DIMM modules:
