SiS5600 Pentium II AT
MAINBOARD
ii
SOMETHING IMPORTANT !
¶
TRADEMARKS
All trademarks used in this manual are the property of their respective owners.
¶
LOAD SETUP DEFAULTS
“LOAD SETUP DEFAULTS” is the function which will have the BIOS default
settings loaded into the CMOS memory, these default settings are the best-case
values that should optimize system performance and increase system stability .This
function will be necessitated when you receive this mainboard, or when the system
CMOS data is corrupted. Please refer to the Section 4-10 for the details.
¶
DISCHARAGE CMOS DATA
Whenever you want to discharge the CMOS data or open the system chassis, Make
sure to disconnect the AC power first because there is always the 5V standby voltage
connected to this mainboard when using an ATX switching power supply. Without
disconnecting the AC power connector from the PC system, the mainboard may be
damaged by any improper action . Please refer to the Section 3-3 for details.
¶
WAKE ON LAN
In order to support the Wake On LAN feature, the system requires a ATX type SPS
(switching power supply) and it must be able to provide at least 700 mA of driving
capability on the “5V standby” voltage. Please refer to the Section 3-3 for details.
¶
WARNING !
The "Static Electricity" may cause damage to the components on the mainboard, In
order to avoid the damage to the mainboard accidentally, please discharge all static
electricity from your body before touching this mainboard.
¶
NOTICE
The information contained in this manual is subject to change without notice.
IMPORTANT
:
In case that you make a wrong BIOS setup and you can not power on
the PC system, you may press and hold the "INSERT" key and then
press the PW button to turn the system power on. When you are using
such way to power on you PC system, the system BIOS will force the
PC system running at the slower speed and then you may trigger the
BIOS setup program and select the proper parameters for the
mainboard. ( such feature is valid for both AT and ATX power )