440EX/LX AT
MAINBOARD
HARDWARE SETUP
3-15
b. When the system is in Suspend mode :
b-1. Click on this switch ( less than 4 seconds ), the system will
return to Full-ON mode.
b-2. Press and hold this switch more than 4 seconds, the system will
be powered off.
R
The setup in CMOS is “Instant-off”:
A. When system power is off :
Click on this switch, the system will be powered on. (when
“password” is selected in the CMOS setup program, you will be
unable to use the PW button to power on the PC system, please see
Section 2-2 and Section 4-8 for more details. )
B. When system power is on :
Click on this switch, the system will be powered off instantly.
5-b. When this mainboard has the AT power supply connected, According to the
setup in CMOS, the PW connector has two functions. It can be the Reset
button or Suspend Switch of your PC system.(please refer to Section- 4-7 and
section 4-8 for BIOS setup)
A.
When the BIOS setup is “Delay 4 sec.”:
The PW switch can be used as a suspend switch. When it is first pressed,
the PC system will be turned into suspend mode, when clicked again, the
PC system will be back to the normal state.
B.
When the BIOS setup is “Instant off”:
The PW switch can be used as a reset button in the PC system. When you
click on this button, the PC system will be reset and restart again.
