PT-5V3T/5VMT
SYSTEM BOARD
HARDWARE SETUP
3-7
(W) SL
Sleep LED connector
When ATX Power is Off :
LED Turn On
When ATX Power is On :
LED Turn Off
Pin # Assignment
Pin # Assignment
1
Signal Pin
2
Ground
(X) PW
Power On / Off and External Suspend Switch Connector
According to the setup in CMOS, the PW connector has two functions. It
can be
the Power Switch or Suspend Switch of your PC system. (the PW switch can be
programmed by the BIOS setup “Soft-off by PWR-BTTN”)
If the setup in CMOS is “Delay 4 Sec.”, the switch function will be
:
A. When system is power off :
Press this switch, the system will power on.
B. When system power is on :
a. The system is in Full-ON mode :
a-1. Click on this switch ( less than 4 seconds ), the system will be
turned into Suspend mode. (turn into the GREEN mode)
a-2. Press and hold this switch for more than 4 seconds, the system
will be powered off.
b. When the system is in Suspend mode :
b-1. Click on this switch ( less than 4 seconds ), the system will
return to Full-ON mode.
b-2. Press and hold this switch more than 4 seconds, the system will
be powered off.
The setup in CMOS is “Instant-off”:
A. When system power is off :
Click on this switch, the system will be powered on.
B. When system power is on :
Click on this switch, the system will be powered off instantly.
