The P4XE-ANB Mainboard
Page 11
You need to complete the following installation steps before you can use your
PC.
!
Check and set the mainboard settings;
!
Install the Central Processing Unit (CPU);
!
Install the memory modules;
!
Install the expansion cards;
!
Connect the ribbon cables, panel wires and power supply;
!
Setup the system BIOS.
'! "#!
Hardware Installation
Installation Checklist (Continued)
Speaker and Power LED Connectors
PW
HL
SL
RS
Power On/Off and Suspend Switch Connector
HDD LED Connector
Standby LED Connector
Reset Button Connector
Speaker and Power LED Connectors
PWRLED
SPK
Power LED
Speaker Connector
Jumpers and Switches
JP1
JP2
JP4
K/B Power
USB1,2 Power
Clear CMOS
Note: Before you start installing your mainboard we strongly recommend that
you use a grounded anti-static mat. We further recommend that you attach an
anti-static wristband, which is grounded at the same location as the mat, to
your wrist.
