WL230USB-L
54Mbps Wireless 802.11b/g USB 2.0
Adaptor
- 9 -
Chapter 3 Configuration
Aztech WL230USB-L Wireless USB Adaptor can be configured by its utility. This section
describes how to configure your Wireless USB Adaptor for wireless connectivity on your Wireless
Local Area Network (WLAN) and use the data security encryption features.
After the Adaptor's driver and utility has been installed, the Adaptor’s tray icon,
or
, will
appear in your system tray. It means the utility is running on your system. If the utility does not run,
you can run the utility by clicking:
Start
>
Program
>
Aztech
>
WL230USB-L
WIRELESS
UTILITY
>
WL230USB-L
Wireless Utility
. If the icon still does not appear, the driver or utility may
be installed incorrectly or the Adaptor is unplugged, please try again.
Icon
means the connection has been established. Icon
means there is no connection.
Double-click the
icon and the configuration screen of the utility will appear. You can also run
the utility by clicking:
Start
>
Program
>
Aztech
>
WL230USB-L
WIRELESS UTILITY
>
WL230USB-L
Wireless Utility
. The utility provides a complete and easy to use set of tools to:
¾
Display current status information
¾
Edit and add configured profiles
¾
Display current diagnostics information
The section below introduces these above capabilities.
)
Note:
If your OS is Windows XP, you can use Windows XP to configure the wireless network settings.
(To use this function, you must upgrade the OS with sp1).
If you want to use Windows XP to configure wireless network settings, just exit the utility.
Right-click the icon
at the bottom of the screen, and click
Exit
to exit the utility.
3.1 Profile
Click the
Profile
tab of the utility and the
Profile
screen will appear, Figure 3.2. The
Profile
screen provides tools to:
¾
Add a Profile
¾
Delete a profile
¾
Edit a profile
¾
Activate a profile