Aztech MDP3858U Series, User Manual

Page: 19 / 34

19
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Chapter 4 — Installing the Modem Drivers
4.3 For Windows NT
®
4.0
1. Start Windows NT
®
.
2. Place your Installation CD/floppy disk into the CD-ROM drive/floppy disk
drive.
3. From the Windows NT
®
taskbar, select Start > Run... .
If your drivers are found in CD , in the Run text box, type:
"
D:\Winnt\** Product Name \setup.exe
"
(Assuming your CD-ROM drive is D . If not, substitute drive letter accordingly)
** Replace with MDP3858spu (if your product model is MDP3858SP-U)
MDP3858vu (if your product model is MDP3858V-U)
MDP3858u (if your product model is MDP3858-U)
MDP3858spue (if your product model is MDP3858SP-UE)
MDP3858vue (if your product model is MDP3858V-UE)
MDP3858ue (if your product model is MDP3858-UE)
If your drivers are found in diskette , type "
A:\setup.exe
"
(Assuming your floppy disk drive is A . If not, substitute drive letter accordingly)
Click OK .
4. From the Modem Board Installation Wizard , click Next and select your
product model .
5. Follow any on-screen instructions to complete the software installation.
6. Restart your system.
This completes the installation of the modem drivers in Windows NT
®
4.0. Please
proceed to the next chapter to test your modem.