Aztech HW553-3G, User Manual, Page: 38 / 49

User Manual v1.0
Page 38 of 49
Advanced Page
Network
Local
This section allows you to configure your local network connection.
•
Router IP Address – this is the router’s default IP address. Use this IP address to access the router’s
Web GUI. Type the Router IP address 192.168.2.1 on your Web browser.
•
Router Subnet Mask – this is the router’s subnet mask.
•
DHCP Enabled- Your HW553 has a built in DHCP server. Your HW553 will automatically assign an IP
address to all the computers that will connect to your network. Check the TCP/IP settings of your
computer and make sure to set it on “Obtain an IP automatically”. Note that when you uncheck
the button it will disable the DHCP server. You need to have another DHCP server or you need
manually set the IP address of the computer when your DHCP is disabled.
•
Start IP Address- This field specifies the first of the IP addresses in the IP address pool.
•
End IP Address- This field specifies the last of the IP addresses in the IP address pool.
•
Subnet Mask- Enter the Subnet Mask provides by your ISP.
•
Primary DNS Server- Enter the Primary DNS server IP address provides by your ISP.
•
Secondary DNS Server- Enter the Secondary DNS server IP address provides by your ISP.
•
Default Gateway- Recommend to use the router’s LAN port IP address.