Aztech FG7008GR(AC) User Manual Download Page 9

Page: 9 / 88

User Manual

Page 9

of 88

LED

STATUS

DESCRIPTION

POWER

Off

No power is supplied to the
device

Green (Steady)

Connected to a Power Supply

Red (Steady)

Error on the device

ETH LAN 1-4

Off

No Ethernet connection

Green (Steady)

Connected to an Ethernet
device

Green (Blinking)

Corresponding port is currently
transmitting / receiving data.

5.0GHz/2.4GHz

Off

There is no device connected
wirelessly

Green (Blinking)

Wireless interface is actively
transmitting / receiving data.

Green (Steady)

There is a device connected
wirelessly

USB

Off

There is no USB device
connected to
the corresponding USB port.

A USB device connected to the
corresponding USB port.

IPTV

OFF

IPTV interface is not up

Green (Steady)

IPTV Interface is up and Set-top
box is active

Red (Steady)

IPTV is up and Set-top box is
inactive/or not connected

BROADBAND

Green (Blinking)

Establishing ONT Signal

Green (Steady)

Connectivity  to  the  ONT  is
established
WAN  Ethernet  interface  is
connected

OFF

There is no connectivity to the
ONT

INTERNET

OFF

No internet

Red (Steady)

Authentication Failed

Green (Steady)

Internet interface is up

WPS

Green (Steady)

WiFi Protected Setup has been
Established

Green (Blinking)

Ongoing / Active WiFi
Protected Setup process

Device Design

Front Panel

Summary of Contents for FG7008GR(AC)
























































































Search results

Summary of Contents for FG7008GR(AC)

Reviews:

Aztech FG7008GR(AC), User Manual, Page: 9 / 88

Search results

Summary of Contents for FG7008GR(AC)

Reviews: