27
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Appendix A Frequently Asked Questions
The Modem Speaker Volume Slider in the Modem Properties
does not work.
The Modem Speaker Volume Slider in the Modem Properties is
meant to be use with TAPI compliant software. If the
Communication Software that you are using is not TAPI compliant,
then you will most probably be unable to control the Modem Speaker
Volume.
Note that Hyperterminal of Windows
®
95 and Windows
®
98
supports both TAPI and NON-TAPI mode. In non-TAPI mode, you
have to manually type in the AT commands to dial up and set the
Modem Speaker Volume yourself. Please check the attached
ATCOMSET.PDF for more information.
How can I update my present (Incorrect) Modem Driver Files
to EM6800 56K External Modem ?
i. Go to the Modem Class in Device Manager.
ii. Go to the properties of your present modem and go to the Driver
Tab.
iii. Insert the Modem Installation CD into your CDROM drive and
click update Driver.
iv. At the Update Device Driver Wizard screen, select Yes to let
Windows search for the driver.
v. The driver will be found at the root directory or the WIN9X
directory of the CD.
vi. Click the Finish button to finish the installation.
vii. Updating is completed.
My TAPI mode Communication Software cannot install/Run.
It could be that you do not have the latest UniModem Drivers
installed on your System. The default drivers in Windows could be
inadequate for your Communication Software. This is the case if you
are using Chinese Windows
®
95.
