19
○
○
○
○
○
Operating AMS 5.1
☞
From DCU
1. Press
(Control knob)
twice.
2. The LED for
MODE
will start blinking, indicating that you can now
select either
Bass
,
Treble
or
Subwoofer
. At the same time, the
BASS
LED will blink. (The LEDs will only blink for approximately 5 seconds.)
3. To adjust the
bass level
, rotate
left/right to decrease/increase.
(Rotate the Control knob before the LEDs stop blinking!)
☞
From Remote Controller
1.
Press either
,
or
.
2.
Press
to
decrease/increase the
bass, treble or Subwoofer
level.
5.4 Adjusting the Bass, Treble and Subwoofer level
If the LED for MODE stops
blinking before you proceed to
the next mode, you have to repeat
from step 1.
4. To proceed to
TREBLE
mode, press
when the LEDs are still blinking. Now, the LED for TREBLE
will blink. Rotate
to decrease/increase the treble level.
Example: To increase the Subwoofer level
Press
x4
(the LED for S.WOOFER blinks)
➫
rotate
right to increase the Subwoofer level.
(The blinking will stop after approximately 5 seconds. The Control knob will again acts as the master volume
control for the speaker system.)
All manuals and user guides at all-guides.com
