Aztech AEK3630, User Manual

Page: 7 / 12

7
STEP 3: Select
Function
You can do any of the provided methods below
in heating your water:
• Option A. Press the ON/OFF (O/I) button, by
default this will boil the water up to 100 °C.
• Option B. Press the + (LCD will display 100°C)
or - (LCD will display 40°C) button, and adjust
until the preferred boiling temperature is
set, press ON/OFF to confirm.
During the boiling process, pressing the + or -
button will reset the selected/targeted water
temperature. However, please take note of the
following :
• If the new temperature selected is HIGHER
than the current water temperature,
the
appliance would continue boiling the
water.
• If the selected temperature is LOWER
than the current water temperature
, the
appliance would stop heating the water.
BOIL WATER
KEEP HOT WATER WARM
You can use the Keep Warm button to heat up
your hot water (up to 2 Hours) according to your
preferred water heat.
NOTE: If the selected KEEP WARM temperature is
LOWER than the current water temperature , the
KEEP WARM feature will not work.
You can do any of the provided options below in
keeping your water warm:
• Option A. Press the ON/OFF (O/I) button,
press the + or - buttons until the preferred
keep warm temperature is set then press
the Keep Warm button.
OPTION A SEQUENCE
OPTION B SEQUENCE
OPTION A SEQUENCE
NOTES:
• The LCD will display a blinking
100°C to indicate that the
water is already boiling.
• Temperature adjustment
is done in 5 increments/
decrements (100, 95, 90..)
NOTE: The Keep Warm function
will only work if the water inside
the kettle is below 90°C.