Easy
Start
Easy Start
Page 4 of 16
Pan European Approval Regulatory Note
The equipment has been approved under CTR21. For such product, the following statement is
required: “This equipment has been approved in accordance with Council Decision 98/482/EC
for Pan European single terminal connection to the Public Switched Telephone Network (PSTN).
However, due to differences between the individual PSTNs provided in different countries the
approval does not, of itself, give an unconditional assurance of successful operation on every
PSTN network termination point. In the event of problems, you should contact your equipment
supplier in the first instance”
Network Compatibility Declaration
This product is designed to interwork with the Public Switched Telecommunication Networks in
UK, Ireland, Netherlands, Sweden, Denmark , Finland, Switzerland, Luxembourg, Belgium,
France, Germany, Spain, Portugal, Iceland, Greece, Italy, Norway and Austria.
New Zealand Telecom Warnings
General
“The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has
accepted that the item complies with minimum conditions for connection to its network. It
indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty.
Above all, it provides no assurance that any item will work correctly in all respects with another
item of Telepermitted equipment of a different make or model, nor does it imply that any product
is compatible with all of Telecom’s network services.”
“This equipment does not fully meet Telecom’s impedance requirements. Performance
limitations may occur when used in conjunction with some parts of the network. Telecom will
accept no responsibility should difficulties arise in such circumstances.”
“This equipment shall not be set up to make automatic calls to the Telecom ‘111’ Emergency
Service.”
“If a charge for local calls is unacceptable, the ‘Dial’ button should NOT be used for local calls.
Only the 7-digits of the local number should be dialed from your telephone. DO NOT dial the
area code digit or the ‘0’ prefix.”
This equipment may not provide for the effective hand-over of a call to another device connected
to the same line.
Important Notice
Under power failure conditions, this telephone may not operate. Please ensure that a separate
telephone, not dependent on local power, is available for emergency use.”
“Some parameters required for compliance with Telecom’s Telepermit requirements are
dependent on the equipment (PC) associated with this device. The associated equipment shall be
set to operate within the following limits for compliance with Telecom’s Specification:
