Aztech 4-Port Wireless G Router User Manual Download Page 83

Page: 83 / 129

User Manual

Page 83

of 129

Layer 2

Layer 2 allows you to map an incoming packet with VLAN priority to CoS. This feature is

only configurable on the WAN interfaces as VLAN is only supported on the WAN side in

the current software release.

Layer 2

Field

Description

Interface

Select the WAN interface here to configure the CoS for incoming traffic. Only WAN
interface can be selected as VLAN is currently supported only on the WAN side.

Class of Service

The selections are (in the order of descending priority): CoS1, CoS2, CoS3, CoS4, CoS5,
and CoS6.

User Priority

The selections are 0, 1, 2, 3, 4, 5, 6, 7.

To configure Ingress Layer 2:

1. Select Advanced Menu

Advanced Menu

Advanced Menu.

2. Select QoS > Ingress

QoS > Ingress

QoS > Ingress.

3. Select the quickstart

quickstart

quickstart interface.

4. Select Layer 2

Layer 2

Layer 2.

Summary of Contents for 4-Port Wireless G Router


































































































































Search results

Summary of Contents for 4-Port Wireless G Router

Reviews:

Brands by name

Popular brands

Aztech 4-Port Wireless G Router, User Manual

Search results

Summary of Contents for 4-Port Wireless G Router

Reviews:

Brands by name

Popular brands